Hariom Tempanes

Our Products

Tempered Glasses

Tempering is athermanl process by which the basic strength of glass is enhanced .During this process the annealed glass is heated to near softening point and then is rapidly cooled by directing Air jets over the surface of glass. This result in surface getting cooler faster than the core of the glass inducing stresses under compression on the surface and tension at the core. Ultimately the glass becomes stronger with higher resistance to thermal and impact load. The above process however does not change the visible and solar factors of the glass thus keeping the basic qualities same while enhancing the strength. Fully tempered glass is almost 4 to 5 times stronger than normal annealed glass. Further, breakage of tempered glass will result in breaking of glass in small diamond like cluster with very low risk factor and hence are sometimes referred to as safety glasses also. However the risk factor is not as low as in case of laminated glasses.

Insulated Glasses

The process of making standard Insulating glass involves the assembling of two or more tiles of glass which are separated by a fixed interval using an spacer and filled with a desiccant (drying agent) or inert gas to for a hermetically sealed unit.

Cool glass saves on cooling cost or heating cost by reducing the U value of the glass that is to say it reduces the transfer of heat from one side to the other side of the glass unit.

Application: Office or Residential complexes, Hospitals, Hotels, Cyber cafes, Restaurants, Laboratories, Pharma tablet units, Turbo generator or such heavy machine enclosures, Telephone exchange, Computer rooms, Airport control towers, Train windows and other such places where noise

Laminated Glasses

Laminated Glass consists of two or more panes of glass permanently bonded together with tough interlayer of Poly Vinyl Butyral (PVB) or Resin under heat or pressure into a single piece. The glass panels may be of equal or different thickness and may be annealed, tempered or heat strengthened.

Laminated Glass is made under strict international standards using the best machineries available for the same.

Application: Laminated glass can be used where is important like School building, Hospitals, Hotels, Theaters, Multiplexes, Shopping malls, Airport and Railway terminals, Airplane and Railway windows, Residences and many other public places.

Automotive & Architectural bent Glasses

Automotive & Architectural bent toughened glass is made in a process similar to the tempering of glass but in this particular process after the glass is brought to a softening temperature it is given a desired cervical shape with a given radius and the same is than suddenly cooled by applying cold air jets. This results in a curved or bend glass with properties of a toughened glass with respect to strength and resistance.

Application: External structural glazing, Shower cubicals, Entrance doors, Sweet shops and other curved display counters, Automobiles, Partitions and capsule elevators, Aquariums, Staircases and many other such applications.

Heat Strengthened Glasses

Heat strengthened glass is produced by a similar process as tempered glass but with a different cooling pattern. The glass is thermally brought to the softening point and then cooled in steps and not rapidly as in case of tempered glass. This gives the glass higher mechanical and thermal strength than annealed glass but less than fully tempered glass. However, it is less vulnerable to spontaneous breakage as in case of Tempered glass. However it breaks almost like an annealed glass and can not be used as a safety glass.

Application: Showroom frontages, High rise buildings, Commercial complexes, Insulating glass panels, Windows and structural glazing, Laminated glass panels and many other such applications.

Products

Tempered Glasses

Insulated Glasses

Laminated Glasses

Automotive & Architectural bent Glasses

Heat Strengthened Glasses

Digital ceramic printed glasses

Industrial Glasses

Our Clients